Water condensation from gas outlet of oxygenator

Condensation and water loss from gas output of the cardiopulmonary bypass (CPB) oxygenator has been the study object of several research. However, little is known about the propagation of the condensation formed at the level of oxygenator and how potentially it can contaminate the surrounding environment. We aimed to document the moment of formation of the ‘gas steam’ derived from the CPB oxygenator during cardiac surgery with thermography imaging. Thermographic camera is a device that creates an image using infrared radiation, similar to a common camera that forms an image using visible light. The brightest (warmest) parts of the image are customarily colored white, the intermediate temperatures reds and yellows, and the dimmest (coolest) parts black. Thermal image captures the condensation phenomenon around the oxygenator perimeter with the same color/temperature code (yellow) of gas outlet. The use of aspiration at the level of the gas outlet could also favor the elimination of the condensation, improve gas exchanges, and potentially reduce the spread of hazardous substances in the operating room.     

Important Parameter Groups in Thermal Protection of Polymers

The problem of thermal protection is explored for two idiosyncratic reactive systems, namely a sacrificial heat-sink material and an intumescent system where a dynamically evolving insulation layer is produced from an initially thin coating. Relatively simple mathematical models of both systems are proposed that encompass the important physical characteristics of each situation and these models are analysed using a mixture of numerical and analytical techniques. Important dimensionless parameter groups are identified and domains of parameter space where thermal performance is particularly good- or particularly bad- are identified.     

Hierarchical non‐negative matrix factorization to characterize brain tumor heterogeneity using multi‐parametric MRI

Tissue characterization in brain tumors and, in particular, in high‐grade gliomas is challenging as a result of the co‐existence of several intra‐tumoral tissue types within the same region and the high spatial heterogeneity. This study presents a method for the detection of the relevant tumor substructures (i.e. viable tumor, necrosis and edema), which could be of added value for the diagnosis, treatment planning and follow‐up of individual patients. Twenty‐four patients with glioma [10 low‐grade gliomas (LGGs), 14 high‐grade gliomas (HGGs)] underwent a multi‐parametric MRI (MP‐MRI) scheme, including conventional MRI (cMRI), perfusion‐weighted imaging (PWI), diffusion kurtosis imaging (DKI) and short‐TE ¹H MRSI. MP‐MRI parameters were derived: T₂, T₁ + contrast, fluid‐attenuated inversion recovery (FLAIR), relative cerebral blood volume (rCBV), mean diffusivity (MD), fractional anisotropy (FA), mean kurtosis (MK) and the principal metabolites lipids (Lip), lactate (Lac), N‐acetyl‐aspartate (NAA), total choline (Cho), etc. Hierarchical non‐negative matrix factorization (hNMF) was applied to the MP‐MRI parameters, providing tissue characterization on a patient‐by‐patient and voxel‐by‐voxel basis. Tissue‐specific patterns were obtained and the spatial distribution of each tissue type was visualized by means of abundance maps. Dice scores were calculated by comparing tissue segmentation derived from hNMF with the manual segmentation by a radiologist. Correlation coefficients were calculated between each pathologic tissue source and the average feature vector within the corresponding tissue region. For the patients with HGG, mean Dice scores of 78%, 85% and 83% were obtained for viable tumor, the tumor core and the complete tumor region. The mean correlation coefficients were 0.91 for tumor, 0.97 for necrosis and 0.96 for edema. For the patients with LGG, a mean Dice score of 85% and mean correlation coefficient of 0.95 were found for the tumor region. hNMF was also applied to reduced MRI datasets, showing the added value of individual MRI modalities. Copyright © 2015 John Wiley & Sons, Ltd.     

Computer-aided design of dry powder inhalers using computational fluid dynamics to assess performance

Dry powder inhalers (DPIs) are gaining popularity for the delivery of drugs. A cost effective and efficient delivery device is necessary. Developing new DPIs by modifying an existing device may be the simplest way to improve the performance of the devices. The aim of this research was to produce a new DPIs using computational fluid dynamics (CFD). The new DPIs took advantages of the Cyclohaler® and the Rotahaler®. We chose a combination of the capsule chamber of the Cyclohaler® and the mouthpiece and grid of the Rotahaler®. Computer-aided design models of the devices were created and evaluated using CFD. Prototype models were created and tested with the DPI dispersion experiments. The proposed model 3 device had a high turbulence with a good degree of deagglomeration in the CFD and the experiment data. The %fine particle fraction (FPF) was around 50% at 60?L/min. The mass median aerodynamic diameter was around 2.8–4?μm. The FPF were strongly correlated to the CFD-predicted turbulence and the mechanical impaction parameters. The drug retention in the capsule was only 5–7%. In summary, a simple modification of the Cyclohaler® and Rotahaler® could produce a better performing inhaler using the CFD-assisted design.     

动态血糖监测优化预混胰岛素治疗效果的临床观察

目的观察iPro2回顾式动态血糖监测优化2型糖尿病预混胰岛素的治疗效果。方法选取40例应用预混胰岛素的患者,随机分为观察组、对照组各20例,对照组在常规SMBG基础上行糖尿病教育,观察组应用美国美敦力公司生产的iPro2回顾式动态血糖监测系统对患者进行个体化糖尿病教育,并观察两组空腹血糖(FBG)、餐后2 h血糖(2 h PG)、糖化血红蛋白(HbA1c)及观察组干预前后平均血糖(MBG)、标准差(SDBG)。结果干预后,两组各指标均明显下降,差异具有统计学意义,P<0.05;与对照组相比,干预后观察组餐后2 h血糖(2 h PG)、MBG、SDBG下降更明显,差异有统计学意义,P<0.05。结论采用iPro2回顾式动态血糖监测指导应用预混胰岛素2型糖尿病患者进行个体化糖尿病教育,优化生活方式,能显著降低患者餐后血糖、平均血糖及血糖波动。     

HIV/AIDS and economic growth: Evidence from West Africa

Human immunodeficiency virus/acquired immune deficiency syndrome (HIV/AIDS) is one of the leading causes of morbidity and mortality in West Africa. Prevalence among the most productive age group in West and Central Africa stood at 1.5%, 3.4.0%, 2.5%, and 2.1% in 1990, 2000, 2010, and 2015 respectively. This study examined the effect of HIV/AIDS on economic growth in West Africa with focus on 11 countries. The augmented Solow model, rooted in the neoclassical growth theory, was used, which was operationalized using dynamic panel data modeling approach. Incidence, prevalence, number of people living with HIV/AIDS (PLWHA), and AIDS‐related deaths were used to measure HIV/AIDS. Estimations using system GMM returned statistically significant results while those of first difference and difference GMM were not. From the outcome of system GMM analysis, a percentage increase in incidence, prevalence, PLWHA, and AIDS deaths correspondingly reduced growth significantly through their effects on life expectancy by 0.15%, 0.02%, 0.004%, and 0.03%. Acquired immune deficiency syndrome deaths and PLWHA lowered economic growth through enrolment but not significantly. The import of the findings is that HIV/AIDS threatens growth through life expectancy in West Africa. Therefore, its spread in the subregion should be effectively contained while proper treatment should be provided for all infected persons.     

The Importance of Venous Return in Starling‐Like Control of Rotary Ventricular Assist Devices

Rotary ventricular assist devices (VADs) are less sensitive to preload than the healthy heart, resulting in inadequate flow regulation in response to changes in patient cardiac demand. Starling‐like physiological controllers (SLCs) have been developed to automatically regulate VAD flow based on ventricular preload. An SLC consists of a cardiac response curve (CRC) which imposes a nonlinear relationship between VAD flow and ventricular preload, and a venous return line (VRL) which determines the return path of the controller. This study investigates the importance of a physiological VRL in SLC of dual rotary blood pumps for biventricular support. Two experiments were conducted on a physical mock circulation loop (MCL); the first compared an SLC with an angled physiological VRL (SLC‐P) against an SLC with a vertical VRL (SLC‐V). The second experiment quantified the benefit of a dynamic VRL, represented by a series of specific VRLs, which could adapt to different circulatory states including changes in pulmonary (PVR) and systemic (SVR) vascular resistance versus a fixed physiological VRL which was calculated at rest. In both sets of experiments, the transient controller responses were evaluated through reductions in preload caused by the removal of fluid from the MCL. The SLC‐P produced no overshoot or oscillations following step changes in preload, whereas SLC‐V produced 0.4 L/min (12.5%) overshoot for both left and right VADs. Additionally, the SLC‐V had increased settling time and reduced controller stability as evidenced by transient controller oscillations. The transient results comparing the specific and standard VRLs demonstrated that specific VRL rise times were improved by between 1.2 and 4.7 s ( = 3.05 s), while specific VRL settling times were improved by between 2.8 and 16.1 seconds ( = 8.38 s) over the standard VRL. This suggests only a minor improvement in controller response time from a dynamic VRL compared to the fixed VRL. These results indicate that the use of a fixed physiologically representative VRL is adequate over a wide variety of physiological conditions.     

工作相关肌肉骨骼疾患与人体工效学负荷研究进展

工作相关肌肉骨骼疾患(WMSDs)是常见的慢性非传染性疾病。WMSDs已成为影响工人健康、降低工人生命质量和造成经济损失的重要因素,可见于多个行业、工种。本文对WMSDs流行现状及人体工效学负荷相关研究进行综述,以期找到职业人群保护的可行方法。